20120225122346 aBFEx.thumb .600 0 DIY

Supplies -
  • Clean jars with lids
  • Distilled water
  • Glycerin (available at most pharmacies)
  • Plastic or ceramic animals, trees and/or figurines
  • Tinsel glitter (mine is from Michaels)
  • Epoxy
  • Sand paper
First up, make sure your jars are cleaned and dried thoroughly. Using your sandpaper, scuff up the underside of the lid and then attach your chosen figurines using a bit of epoxy. (You can find mini Christmas trees, plastic deer and other little characters at places like Hobby Lobby and Michaels.) Epoxy is going to be your best defense against water over time, but it can be a bit thick and stinky so be sure to use it according to the manufacturer’s instructions. Let the epoxy set completely and then fill your jar just short of full with distilled water. (You can get distilled water anywhere that you buy bottled water.)
Next up, add the tiniest drop of glycerin to the water. If you add too much it’s going to make the water kind of thick and chunky so depending on the size of your jar, you’re likely not going to want more than one drop. (But don’t skip this step because the glycerin helps suspend the glitter in the water giving it that snowy effect.) Add your glitter to the jar, using more or less depending on how snowy you’d like your snow globe to appear. For best results, I found using tinsel glitter (which has larger glitter particles) worked best and gave the best snow-like look.